Good News
For your construction project, renovation and extension consult our experts who will offer you a turnkey solution
(study-laying-monitoring).

www.soveco.com |  contact: +33(0)6-72-37-81-66

CTThis technical handbook describes the installation procedure for SOVECO® Wood Shingles and it aims to define the execution conditions for wood shingle siding jobs on the most common types of façades and roofs.
This handbook addresses architects, firms, designers and control bureaus.
It presents details for the execution of roofs, the laying of SOVECO® Wood Shingles and the different most common types of watertight unions and joints so that they may be implemented in the best possible way. Roofs built in this manner will have a maximum useful lifespan

WARNING : Availability of these documents does not give patent rights. 
Only purchase of the products from one of our manufacturers or retailers authorizes usage and change of the PATENTS.

To see/download the new Technical Handbook Soveco®,  Please  log in on the website HERE

qualibat 2011   qualibat 2010   qualibat 2009   qualibat 2008   qualibat 2007

Schéma de disposition des bardeaux
  • Tiles are always installed with the wood grain on the vertical and with the narrowest end pointing upwards. Las tejas se montan siempre con los hilos de la madera en el sentido vertical y el extremo más fino hacia arriba. The 600 mm. x 120 mm. wood tiles are placed leaving between 180 mm. and 200 mm. exposed (the visible part) for the entire slope higher than
    30 %.
  • For slopes between 25 and 27 %, the exposed part must be 160 mm.
  • For lower slopes, an additional waterproofing device should be installed. The installation called « decorative or snow-catcher » is done by leaving a 400 mm. exposed part.
  • Tiles are installed on strips with a separation between them that is equal to the length of the exposed part.
  • The second row of tiles is attached to the first row at the base of the roof (doubled).
  • Separations of 3 mm. to 12 mm. must be left between two tiles.
  • Joins or vertical separations between tiles must be in the middle of the preceding row, shifted for a minimum of 30 mm., and they shouldn’t line up for at least three consecutive rows. Tiles are attached by two holes per tile at some 20 mm. from the edges and 40 mm. above the line of the exposed part o that they are covered up by the following tiles. The nails should penetrate to a level where the head ican be felt protruding but it does not destroy the fibre of the wood. Length is 45 mm. for the JUMBO and 38 mm. for the STANDARD.


Warning: if the natural wood is too dry it should be dampened before installation or perforated first.

This installation description follows Norm NF P 65-210-1 and our implementation instructions.

La Tuile de Bois Soveco headquarters

Industrie Bois SAS ZI les Gaillons 61400 ST HILAIRE LE CHATEL

Tel.: +33(0) 233 735 788

E-mail: indubois @ gmail.com

Publication Director

Publication Director is Mr. Pierre Georges Hervé in his capacity as director.

Web Site host

The website is hosted by the Arsys Company.
102, Avenue de la Salanque BP 40518 66005 Perpignan Cedex, France
Tel.:
0800 940 865

Creative Agency Web Site

The website has evolved through the agency ICT COUNCIL specialist Joomla CMS solutions in the PACA region between Aix and Marseille. www.joomla-conseil.com

Credits

This website has been developed with Joomla! The program and the templates used by defect are protected by Copyright 2005 Open Source Matters. Any other contents and information, including data collected from the website and the templates added after its installation are protected by the copyright of its owners.

Conditions for Use

Except in the cases where stated otherwise, all text and illustrations appearing on this site are the exclusive property of the Industrie Bois company. The Industrie Bois Company is not responsable for the contents of a website with which a link or an RSS flux is established.

Nominative Information

You have the right of Access, modification, correction and elimination of your personal information (Article 34 of the “Informatique et Libertés” Law of January 6, 1978). You may exercise your right by contacting us at :

Industrie Bois SAS, ZI les Gaillons, 61400, ST HILAIRE LE CHÂTEL, or by E-mail at indubois @ gmail.com In no case will the data on this site be transmitted to third parties, for comercial purposes or otherwise.

Passage of gilded wood...
In its natural state, species show slight differences in color: with age, the color becomes more silvery.
This does not affect in any way the quality of the tiles since it is the wood’s natural protection mechanism.
Treatment applied to the tiles is either green or colourless, and in no way affects the final look of the tiles.
...with silver wood